
Chapter 12 Maintenance
Click Maintenance > Remote MGMT > Telnet to open this screen as shown next.
Figure 107 Telnet Screen
This screen contains the following fields:
Table 83 TelnetLABEL | DESCRIPTION |
Enable | Select this to enable remote management using this service. |
|
|
Port Number | Enter the port number this service can use to access the WiMAX Device. The |
| computer must use the same port number. |
|
|
Allow Connection | Select this to allow connections using this service that originate on the WAN. |
from WAN |
|
|
|
Allow Connection | Select this to allow connection using this service that originate on the LAN. |
from LAN |
|
|
|
12.5 SSH
Use this screen to allow remote access to the WiMAX Device from a network connection over SSH.
Click Maintenance > Remote MGMT > SSH to open this screen as shown next.
Figure 108 SSH ScreenThis screen contains the following fields:
Table 84 SSHLABEL | DESCRIPTION |
Enable | Select this to enable remote management using this service. |
|
|
Port Number | Enter the port number this service can use to access the WiMAX Device. The |
| computer must use the same port number. |
|
|
Allow Connection | Select this to allow connections using this service that originate on the WAN. |
from WAN |
|
|
|
Allow Connection | Select this to allow connection using this service that originate on the LAN. |
from LAN |
|
|
|
182 |
|
WiMAX Device Configuration User’s Guide | |
|
|