Chapter 12 Maintenance

12.9 Date/Time

Use these settings to set the system time or configure an NTP server for automatic time synchronization.

Click Maintenance > Date/Time > Date to open this screen as shown next.

Figure 112 Date Screen

This screen contains the following fields:

Table 88 Date

LABEL

DESCRIPTION

Manual

 

 

 

New Time

Enter the new time in this field.

 

 

New Date

Enter the new date in this field.

 

 

Get from Time Server

Time Protocol

Select the time service protocol that your time server uses.Check with your ISP

 

or network administrator, or use trial-and-error to find a protocol that works.

 

• NTP (RFC 1305) - This format is similar to Time (RFC 868).

 

 

Time Server

Enter the IP address or URL of your time server. Check with your ISP or network

Address 1~4

administrator if you are unsure of this information.

 

 

12.10 Time Zone

Use this screen to set the time zone in which the WiMAX device is physically located.

 

187

WiMAX Device Configuration User’s Guide