Chapter 12 Maintenance

Click Maintenance > Backup/Restore > Restore to open this screen as shown next.

Figure 118 Restore Screen

This screen contains the following fields:

Table 94 Restore

LABEL

DESCRIPTION

Configuration File

Click Browse... then browse to the location of a firmware upgrade file and select

 

it.

 

Click File Restore to upload the specified configuration to the WiMAX Device

 

and replace the current settings.

 

 

Backup

Enter the URL or IP address of the backup configuration file’s location on the

Configuration File

network.

URL

Click URL Restore to upload the specified configuration to the WiMAX Device

 

 

and replace the current settings.

 

 

12.15.1 The Restore Configuration Process

When the WiMAX Device restores a configuration file, the device automatically restarts. This causes a temporary network disconnect.

Note: Do not turn off the device while configuration file upload is in progress.

If the WiMAX Device’s IP address is different in the configuration file you selected, you may need to change the IP address of your computer to be in the same subnet as that of the default management IP address (192.168.5.1). See the Quick Start Guide or the appendices for details on how to set up your computer’s IP address.

You might have to open a new browser to log in again.

If the upload was not successful, you are notified with an error message.

12.16 Factory Defaults

Use this screen to restore the WiMAX Device to its factory default settings.

 

191

WiMAX Device Configuration User’s Guide