Chapter 6 WiMAX

Click WiMAX > Wide Scan to open this screen as shown next.

Figure 37 Wide Scan Screen

This screen contains the following fields:

Table 21 Wide Scan

LABEL

 

DESCRIPTION

Wide Scan Settings

 

 

 

Auto Wide

 

Use this to enable (Yes) or disable (No) automatically scanning for base

Scan

 

stations.

 

 

Wide Scan Range

 

 

Start

 

Enter the start frequency in kilohertz (KHz) for a wide scan range.

Frequency

 

 

(KHz)

 

 

 

 

 

End

 

Enter the end frequency in kilohertz (KHz) for a wide scan range.

Frequency

 

 

(KHz)

 

 

 

 

 

Step (KHz)

 

Enter the step increment in kilohertz (KHz) that the wide scan jumps each time it

 

 

scans between the start and end frequencies.

 

 

 

Bandwidth

 

Enter the frequency bandwidth to be scanned.

(MHz)

 

 

 

 

 

Delete

 

Click this to remove a range of frequencies from the wide scan range list.

 

 

 

Add

 

Click this to add a range of frequencies to the wide scan range list.

 

 

 

OK

 

Click this so save any changes to the wide scan range list.

 

 

 

Wide Scan Result

 

This table displays the available frequency band(s) found through the wide scan.

 

 

Frequency

 

This field displays the frequency in kilohertz (KHz).

(KHz)

 

 

 

 

 

Bandwidth

 

This field displays the bandwidth in megahertz (MHz).

(MHz)

 

 

 

 

 

Search

 

Click this to initiate a wide scan.

 

 

 

Clear

 

Click this to clear the wide scan results.

 

 

 

86

 

WiMAX Device Configuration User’s Guide