ZyXEL Communications max208m Connect, Connect, Connect, Connect, Table 20 Connect, LABELDESCRIPTION, WiMAX > Wide Scan, WiMAX > Wide Scan, Auto Connect Mode, Network Search Mode

Chapter 6 WiMAX

This screen contains the following fields:

Table 20 Connect

LABELDESCRIPTION

Applied Frequency Information

This table shows the scanning result you made in the WiMAX > Profile > Frequency Settings and WiMAX > Wide Scan screens.

Note: You cannot see the wide scanning result that you made in WiMAX > Wide Scan screen if the Join Wide Scan Result is set to No in the WiMAX > Profile > Frequency Settings screen.

Applied Frequency Information

Frequency	This field displays the available center frequency of a frequency band in kilohertz
(KHz)	(KHz).
Bandwidth	This field displays the bandwidth of the frequency band in megahertz (MHz).
(MHz)

Available Network List

Connected	Select a connect mode:
Mode	• Auto Connect Mode - This allows the WiMAX Device to connect to any of
	the base stations on the list automatically.
	• Network Search Mode - This allows the WiMAX Device to connect to a
	user-specified base station. Select this option, choose a base station, click
	Connect.
	• NSP Mode - This allows the WiMAX Device to connect to a base station with
	a user-specified NSP ID. To specify the NSP ID, select a result in the list and
	click Connect. The WiMAX Device will automatically connect to a base
	station with the same NSP ID, and the best CINR or RSSI.
	• NSP/NAP Mode - This allows the WiMAX Device to connect to a base station
	with a user-specified NSP ID and NAP ID. To specify the NSP ID and NAP ID,
	select a result in the list and click Connect. The WiMAX Device will
	automatically connect to a base station with the same NSP ID and NAP ID,
	and the best CINR or RSSI.
	• NSP/NAP/BSID Mode - This allows the WiMAX Device to connect to a base
	station with a user-specified NSP ID, NAP ID and BSID. To specify the NSP
	ID, NAP ID and BSID, select a result in the list and click Connect. The
	WiMAX Device will automatically connect to a base station with the same NSP
	ID, NAP ID and BSID, and the best CINR or RSSI.
Connect	Click this to connect to the selected base station.
Disconnect	Click this to disconnect from the selected base station.
BSID	This field displays the base station MAC address.
NSP	This field displays the NSP ID.
NAP	This field displays the NAP ID.
Network Type	This field displays the network type.
Preamble ID	This field displays the preamble ID.
	The preamble ID is the index identifier in the header of the base station’s
	broadcast messages. In the beginning of a mobile stations’s network entry
	process, it searches for the preamble and uses it to additional channel
	information.
	The preamble ID is used to synchronize the upstream and downstream
	transmission timing with the base station.
Frequency	This field displays the center frequency the base station uses in kilohertz (KHz).
(MHz)
Bandwidth	This field displays the frequency band bandwidth the base station uses in
(MHz)	megahertz (MHz).

84
	WiMAX Device Configuration User’s Guide