Chapter 3 Setup Wizard

Note: This settings should be provided by your VoIP service provider.

Figure 12 Setup Wizard > VoIP Settings

The following table describes the labels in this screen.

Table 8 Setup Wizard > VoIP Settings

LABEL

DESCRIPTION

Line 1/2 SIP Account - Configure this section to use the PHONE 1 and/or PHONE 2 port.

 

 

Enable

Select this to activate the SIP account.

 

 

SIP Server

Enter the IP address or domain name of the SIP server.

 

 

Port Number

Enter the SIP server’s listening port number.

 

 

Subscriber Number

Enter your SIP number. In the full SIP URI, this is the part before the @ symbol.

 

 

Display Name

Enter the name that appears on the other party’s device if they have Caller ID

 

enabled.

 

 

Authentication

Type the SIP user name associated with this account for authentication to the SIP

Name

server.

 

 

Password

Type the SIP password associated with this account.

 

 

Back

Click to display the previous screen.

 

 

Next

Click to proceed to the next screen.

 

 

 

31

WiMAX Device Configuration User’s Guide