ZyXEL Communications max208m NAT, Save, Save, Server, Operation Mode, Network Setting > WAN, Network Setting > LAN > DHCP

Chapter 4 Tutorials

4Log into the Web Configurator and open the Network Setting > LAN > DHCP screen.

5Select Server for the DHCP mode, then enter 192.168.100.10 and 192.168.100.30 as your DHCP starting and ending IP addresses.

6Leave the other settings as their defaults and click Save.

7Next, go to the Network Setting > WAN screen and select NAT in the Operation Mode field. Click Save.

8Connect your computers to the WiMAX Device’s Ethernet ports and you’re all set!

Note: You may need to configure the computers on your LAN to automatically obtain IP

addresses. For information on how to do this, see Appendix B on page 209.

	37
WiMAX Device Configuration User’s Guide