
Chapter 7 Network Setting
Click Network Setting > Route > RIP to open this screen as shown next.
Figure 54 RIP ScreenThis screen contains the following fields:
Table 37 RIPLABEL | DESCRIPTION |
General Setup |
|
|
|
Enable | Select this to enable RIP on the WiMAX Device. |
|
|
Redistribute |
|
|
|
Active | This indicates whether a route is being redistributed. |
|
|
Type | This indicates what type of route is being redistributed. |
|
|
Metric | This indicates the metric that is being used for redistribution. |
|
|
Edit | Click this to edit a selected route. |
|
|
OK | Click this to save any changes to the redistribution table. |
|
|
LAN |
|
|
|
Direction | Set the LAN network direction to use with RIP. |
|
|
Version | Set the RIP version to use. |
|
|
Authentication | Use this option to enable or disable RIP authentication. |
|
|
Authentication ID | Enter the authentication ID to use for RIP authentication. |
|
|
Authentication | Enter the authentication key to use for RIP authentication. |
Key |
|
|
|
WAN |
|
|
|
Direction | Set the WAN network direction to use with RIP. |
|
|
Version | Set the RIP version to use. |
|
|
106 |
|
WiMAX Device Configuration User’s Guide | |
|
|