Chapter 4 Tutorials
In the following figure, router R is connected to the WiMAX Device’s LAN. R connects to two networks, N1 (192.168.1.x/24) and N2 (192.168.10.x/24). If you want to send traffic from computer A (in N1 network) to computer B (in N2 network), the traffic is sent to the WiMAX Device’s WAN default gateway by default. In this case, computer B will never receive the traffic.
N1
A
R
N2
B
You need to specify a static routing rule on the WiMAX Device to specify R as the router in charge of forwarding traffic to N2. In this case, the WiMAX Device routes traffic from computer A to R and then R routes the traffic to computer B.
N1
A
R
N2
B
This tutorial uses the following example IP settings:
Table 10 IP Settings in this Tutorial
| DEVICE / COMPUTER | IP ADDRESS |
The WiMAX Device’s WAN | 172.16.1.1 |
|
|
The WiMAX Device’s LAN | 192.168.1.1 |
|
|
A | 192.168.1.34 |
|
|
R’s IP address on N1 | 192.168.1.253 |
|
|
| 47 |
WiMAX Device Configuration User’s Guide | |
|
|