Chapter 3 Setup Wizard
3.1.2 LAN Settings
The LAN Settings screen allows you to configure your local network options.
Figure 9 Setup Wizard > LAN Settings
The following table describes the labels in this screen.
Table 5 Setup Wizard > LAN Settings
LABEL | DESCRIPTION |
LAN TCP/IP |
|
|
|
IP Address | Enter the IP address of the WiMAX Device on the LAN. |
| Note: This field is the IP address you use to access the WiMAX Device on the LAN. If |
| the web configurator is running on a computer on the LAN, you lose access to |
| it as soon as you change this field. You can access the web configurator again |
| by typing the new IP address in the browser. |
|
|
IP Subnet | Enter the subnet mask of the LAN. |
Mask |
|
|
|
DHCP Server |
|
|
|
Enable | Select this if you want the WiMAX Device to be the DHCP server on the LAN. As a |
| DHCP server, the WiMAX Device assigns IP addresses to DHCP clients on the LAN |
| and provides the subnet mask and DNS server information. |
|
|
Start IP | Enter the IP address from which the WiMAX Device begins allocating IP addresses. |
|
|
End IP | Enter the IP address at which the WiMAX Device stops allocating IP addresses. |
|
|
Lease | Enter the duration in minutes before the device requests a new IP address from the |
Time | DHCP server. |
|
|
DNS Server assigned by DHCP Server | |
|
|
First DNS | Specify the first IP address of three DNS servers that the network can use. The |
Server | WiMAX Device provides these IP addresses to DHCP clients. |
|
|
26 |
|
WiMAX Device Configuration User’s Guide | |
|
|