Chapter 7 Network Setting
7.15.1 Port Trigger Wizard
Use the wizard to create a port trigger rules that will allow the WiMAX Device to automate port forwarding and allow computers on local network to provide services that would normally require a fixed address on the local network.
Click Network Setting > NAT > Port Trigger > Wizard
Figure 58 Port Trigger Wizard Screen
This screen contains the following fields:
Table 41 Port Trigger Wizard
LABEL | DESCRIPTION |
Active | Select this to make this port trigger rule active. |
|
|
Port Trigger Rule | Select the type of port trigger rule. |
|
|
Rule Name | Enter a name for the port trigger rule. |
|
|
Trigger Protocol | Select the type of port trigger protocol. |
|
|
Trigger Start Port | Enter the port trigger start port. |
|
|
Trigger End Port | Enter the port trigger end port. |
|
|
Open Protocol | Select the type of open protocol for the port trigger rule. |
|
|
Open Start Port | Select the starting open port for the port trigger rule. |
|
|
Open End Port | Select the ending open port number for the port trigger rule. |
|
|
110 |
|
WiMAX Device Configuration User’s Guide | |
|
|