Chapter 6 WiMAX

Click WiMAX > Profile > Frequency Settings to open this screen as shown next.

Figure 27 Frequency Settings Screen (By List)

A

B

Figure 28 Frequency Settings Screen (By Range)

A

B

This screen contains the following fields:

Table 13 Frequency Settings

LABEL

DESCRIPTION

Setting Type

Select whether to scan base stations by entering specific frequency(-ies) (By

 

List) or a range of frequencies (By Range).

 

Note: When you select By Range, you can only configure one range of

 

frequencies in this screen. To configure multiple frequency ranges, use the

 

WiMAX > Wide Scan screen.

 

Note: Some settings in this screen are only available depending on the Setting

 

Type selected.

 

 

Join Wide Scan

The scanning result of the frequency to scan you configured in this screen will

Result

be shown in the WiMAX > Connect screen. Select this option to determine

 

whether to also append the wide scanning result (configured in the WiMAX >

 

Wide Scan screen) to the same table.

 

 

Default

Select the default bandwidth (size) per frequency band you specify in table A.

Bandwidth

 

 

 

A (When By List is selected in the Setting Type field)

 

 

Frequency

This displays the center frequency of an frequency band in kilohertz (KHz).

(KHz)

Click the number to modify it.

 

 

Enter the center frequency in this field when you are adding an entry.

 

 

 

73

WiMAX Device Configuration User’s Guide