Chapter 12 Maintenance

12.6 SNMP

Use this screen to allow remote access to the WiMAX Device from a network connection over SNMP.

Click Maintenance > Remote MGMT > SNMP to open this screen as shown next.

Figure 109 SNMP Screen

This screen contains the following fields:

Table 85 SNMP

LABEL

DESCRIPTION

Enable

Select this to enable remote management using this service.

 

 

Location

Enter the location of the SNMP server (for example, “Engineering Dept., Floor 6,

 

Building A, New York City”).

 

 

Contact

Enter contact information for the administrator managing the SNMP server (for

 

example, “Bill Smith, IT Dept., (555) 555-5454”).

 

 

Read Community

Enter the password for the incoming Get and GetNext requests from the

 

management station. The default is public and allows all requests.

 

 

Write Community

Enter the password for incoming Set requests from the management station.

 

The default is public and allows all requests.

 

 

Trap Server

Enter the IP address of the station to send your SNMP traps to.

 

 

Trap Community

Enter the trap community, which is the password sent with each trap to the

 

SNMP manager. The default is public and allows all requests.

 

 

12.7 CWMP

Use this screen to allow CWMP connections for remote management, firmware upgrades and troubleshooting.

 

183

WiMAX Device Configuration User’s Guide