Chapter 12 Maintenance

Click Maintenance > Backup/Restore > Factory Defaults to open this screen as shown next.

Figure 119 Factory Defaults Screen

This screen contains the following fields:

Table 95 Factory Defaults

LABEL

DESCRIPTION

Reset

Click this to clear all user-entered configuration information and return the

 

WiMAX Device to its factory defaults. There is no warning screen.

 

 

12.17 Log Setting

Use this screen to configure which type of events on the WiMAX Device are logged.

Click Maintenance > LOG > Log Setting to open this screen as shown next.

Figure 120 Log Setting Screen

This screen contains the following fields:

Table 96 Log Setting

LABEL

DESCRIPTION

Enable Log

Select this to have the WiMAX Device log network activity according to the

 

selected Log Level.

 

 

Log Level

Select the type of logs to record.

 

 

Enable Remote

Select this to allow logs to be recorded and stored on a remote logs server.

Log

 

 

 

Remote Log Host

Enter the remote log host IP address if Enable Remote Log is selected.

 

 

Remote Log Port

Enter the remote log host port if Enable Remote Log is selected.

 

 

12.18 Log Display

Use this screen to view the log messages of the WiMAX Device.

192

 

WiMAX Device Configuration User’s Guide