Chapter 10 Maintenance
Figure 66 Maintenance: Firmware Upgrade
5After the file transfer is complete, a screen displays showing the result. Click Done to close the screen. When the firmware upgrade process is complete, the switch(es) automatically restarts (the SYS LED blinks).
Figure 67 Maintenance: Firmware Upgrade: Result
6Wait until the switch(es) has finished rebooting before accessing it again. Check the firmware version on the switch to make sure that the firmware is updated successfully.
10.2Device Reset
Use the Reboot System screen to restart a switch without physically turning the power off.
1Click Maintenance > Device Reset.
2Select a device from the list and click Apply.
108 |
| |
NetAtlas Workgroup User’s Guide |
| |
|
|
|