Chapter 6 Template
6.4 Static Multicast Group Template
Use the static multicast filter to allow incoming frames based on multicast MAC address(es) that you specify. This feature can be used in conjunction with IGMP snooping to allow multicast MAC address(es) that are not learned by IGMP snooping. Use the static multicast filter to pass routing protocols, such as RIP and OSPF.
Click Template > Multicast Template to display the screen as shown.
Figure 43 Template: Multicast Template
The following table describes the labels in this screen.
Table 34 Template: Multicast
LABEL | DESCRIPTION |
Device Type | Select a device from the |
|
|
Template |
|
|
|
No. | This field displays the index number. |
|
|
Multicast Name | This field displays the descriptive name for the multicast template. |
|
|
New | Click New to create a new multicast template. |
|
|
Modify | Click Modify to change the settings of the selected multicast template. |
|
|
Delete | Click Delete to remove the selected multicast template. |
|
|
Port List |
|
|
|
Port | This field displays the port number. |
|
|
Immed. Leave | This field displays True when the switch is set to remove this port from the multicast |
| tree when an IGMP version 2 leave message is received on this port. |
| This field displays False when the feature is disabled. |
|
|
82 |
| |
NetAtlas Workgroup User’s Guide |
| |
|
|
|