Chapter 18 Configuration
Table 104 RMON Configuration, Alarm Config., New (continued)
LABEL | DESCRIPTION |
Sample Type | Select the method of obtaining the sample value. Choices are Absolute Value and |
| Delta Value. |
|
|
Startup Alarm | Select the startup alarm type (Rising Alarm, Falling Alarm, Rising Or Falling |
| Alarm). |
Rising |
|
Condition |
|
|
|
Rising | Specify a rising threshold (between 0 and 2147483647). When a value that is |
Threshold | greater or equal to this threshold, the probe triggers an alarm. |
|
|
Rising Event | Click Browse to select an index number of a rising event. |
|
|
Falling |
|
Condition |
|
|
|
Falling | Specify the falling threshold (between 0 and 2147483647). When a value that is |
Threshold | smaller or equal to this threshold, the probe triggers an alarm. |
|
|
Falling Event | Click Browse to select an index number of a falling event. |
|
|
Owner | Enter a descriptive name of the application that creates this entry. You can use |
| printable ASCII characters. Spaces are allowed. |
|
|
OK | Click this to save the settings and close this screen. |
|
|
Cancel | Click this to discard all changes and close the screen. |
|
|
Use this screen to display alarm logs. To open this screen, click Configuration, RMON Configuration, Alarm Config, Show Log.
Figure 145 RMON Configuration: Alarm Config.: Show Log
The following table describes the labels in this screen.
Table 105 RMON Configuration: Alarm Config.: Show Log
LABEL | DESCRIPTION |
No. | This field displays an index number. |
|
|
Event Index | This field displays an event index number. |
|
|
Log Index | This field displays a log index number. |
|
|
Time | This field displays the time a log was generated. |
|
|
Sample Type | This field displays the method of obtaining the sample value. |
|
|
Close | Click this to close this screen. |
|
|
198 |
| |
NetAtlas Workgroup User’s Guide |
| |
|
|
|