Chapter 13 System Configuration
Figure 90 System Configuration: SNMP Conf.
The following table describes the labels in this screen.
Table 56 System Configuration: SNMP Conf.
LABEL | DESCRIPTION |
Read Community | Enter the get community, which is the password for the incoming Get- and |
| GetNext- requests from the management station. |
|
|
Read/Write Community | Enter the set community, which is the password for incoming Set- requests |
| from the management station. |
|
|
Trap Community | Enter the trap community, which is the password sent with each trap to the |
| SNMP manager. |
|
|
Apply | Click Apply to save your changes back to the switch. |
|
|
Trap Destination | Enter the IP addresses of up to four stations to send your SNMP traps to. |
|
|
Apply | Click Apply to save the trap destination changes back to the switch. |
|
|
13.3 Remote Management
Remote management allows you to determine which services/protocols can access which device interface (if any) from which computers. You can customize the service port and the secured client IP address to enhance security and flexibility.
To open this screen,
| 133 |
NetAtlas Workgroup User’s Guide | |
|
|