Chapter 19 IP Configuration
Figure 152 IP Configuration: DHCP: Server: New
The following table describes the labels in this screen.
Table 113 IP Configuration: DHCP: Server: New
LABEL | DESCRIPTION |
VID | Enter the ID number of the VLAN group to which this DHCP settings apply. |
|
|
Client IP Pool | Specify the first of the contiguous addresses in the IP address pool. |
Starting |
|
|
|
Size of Client | Specify the size, or count of the IP address pool. |
IP Pool |
|
|
|
IP Subnet | Enter the subnet mask of the DHCP server. |
Mask |
|
|
|
Default | Enter the IP address of the default gateway device. |
Gateway |
|
|
|
Primary/ | Enter the IP addresses of the DNS servers. The DNS servers are passed to the |
Secondary | DHCP clients along with the IP address and the subnet mask. |
DNS Server |
|
|
|
Apply | Click Apply to save the changes and close this screen. |
|
|
Cancel | Click Cancel to discard all changes and close this screen. |
|
|
Configure DHCP relay on the switch if the DHCP clients and the DHCP server are not in the same subnet. During the initial IP address leasing, the switch helps to relay network information (such as the IP address and subnet mask) between a DHCP client and a DHCP server. Once the DHCP client obtains an IP address and can connect to the network, network information renewal is done between the DHCP client and the DHCP server without the help of the switch.
206 |
| |
NetAtlas Workgroup User’s Guide |
| |
|
|
|