Chapter 19 IP Configuration
The following table describes the labels in this screen.
Table 108 DiffServ: DSCP Setting
LABEL | DESCRIPTION |
Active | Select Active to enable DiffServ on the port. |
|
|
Apply | Click Apply to save the changes. |
|
|
19.3 DSCP Setting
You can configure the DSCP to IEEE802.1p mapping to allow the switch to prioritize all traffic based on the incoming DSCP value according to the DiffServ to IEEE802.1p mapping table.
The following table shows the default
Table 109 Default
DSCP | 0 – 7 | 8 – 15 | 16 – 23 | 24 – 31 | 32 – 39 | 40 – 47 | 48 – 55 | 56 – 63 |
VALUE |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
IEEE802.1P | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 |
|
|
|
|
|
|
|
|
|
Configure DSCP mappings in the DSCP Setting screen.
Figure 149 IP Configuration: DiffServ
202 |
| |
NetAtlas Workgroup User’s Guide |
| |
|
|
|