Chapter 3 Switch Manager
3.10 Configuration Save
You must save the current configuration in the EMS to the selected switch(es) to make the changes take effect.
"If an administrator is currently logged into the device via the console port or the CLI (Command Line Interface), you cannot save the device settings from the
EMS. Do NOT turn off the switch during the updating process, as it may corrupt the firmware and make your switch unusable.
1To save the current switch configuration, select and
2Click Configuration Save.
3Choose a switch from the list in the screen. You can select more than one switch by pressing [CTRL] and click at the same time. Note that switches that are online are displayed in green. Off line switches are displayed in red.
Figure 18 Configuration Save
4Click Apply to save the current configuration. All settings configured on the EMS will be saved to the selected switch(es).
5A screen displays showing the configuration save result. Click Done to close the screen.
50 |
| |
NetAtlas Workgroup User’s Guide |
| |
|
|
|