Chapter 4 Map

4.1.1 Adding a Submap or Device

To add a new submap or a new device, select the Root Subnet or a submap icon in the Device List Panel.

Click Map > Add Submap/Device to display the following screen.

Figure 21 Map: Add Submap/Device

The following table describes the labels in this screen.

Table 13 Map: Add Submap/Device

LABEL

DESCRIPTION

Properties

These options are not applicable when you edit the properties of an existing

 

submap or device.

 

Select the Submap or Device radio button to add a new submap or device icon to

 

the Device List Panel.

 

If you select Submap, only the Name and Description fields display are

 

applicable; all other fields appear as read-only.

 

 

Name

Enter a descriptive name (up to 30 characters) for identification purposes.

 

 

IP Address

This field is not applicable when you select Submap.

 

Enter the IP address of the device.

 

 

Login Name

Enter the administrator account user name to log into the switch.

 

 

Password

Enter the administrative password (up to 30 characters) you use to log in to the

 

switch. This password is used by the EMS administrator for device firmware

 

upload.

 

 

Description

Enter a description (up to 30 characters) about the device.

 

 

Get Community

Enter the get community, which is the password for the incoming Get- and GetNext-

 

requests from the management station.

 

 

Set Community

Enter the set community, which is the password for incoming Set- requests from the

 

management station.

 

 

Trap Community

Enter the trap community, which is the password sent with each trap to the SNMP

 

manager.

 

 

54

 

NetAtlas Workgroup User’s Guide