|
| Chapter 15 VLAN |
| Table 76 VLAN Configuration: 802.1Q (continued) | |
| LABEL | DESCRIPTION |
| Modify | Click on a VLAN in the |
|
| Name or change the configuration of the egress, forbidden and untagged ports. |
|
| Click the Modify button to save the changes. |
|
|
|
| Load Template | Use a VLAN template to overwrite existing selected VLANs. Select one or more |
|
| VLANs and click the Load Template button. See Section 6.2 on page 77 for more |
|
| information. |
|
|
|
| Port List | Click on a port in the Egress Ports list to add the selected port to the port list. If a |
|
| port is not selected from any of the three port lists, then it is a normal tagged port. |
|
| Refer to Table 77 on page 159 for the VLAN port type descriptions. |
|
|
|
| Close | Click Close to close the screen. |
|
|
|
Ports are assigned membership in a VLAN by associating a VLAN ID with the ports. In the VLAN Configuration screen, click New or Modify to display the setup screen.
Figure 112 VLAN Configuration: 802.1Q: New or Modify
The following table describes the labels in this screen.
Table 77 VLAN Configuration: 802.1Q: Modify
LABEL | DESCRIPTION |
VLAN Identity |
|
|
|
Active | Select Active to enable this VLAN. |
|
|
VLAN ID | This field displays a unique number to identify the VLAN. |
|
|
| 159 |
NetAtlas Workgroup User’s Guide | |
|
|