Chapter 16 Ethernet Port Configuration

The following table describes the fields in this screen.

Table 82 Ethernet Port Configuring: Port Link Aggregation

LABEL

DESCRIPTION

Group

Select the trunk group to which a port belongs.

 

 

LACP

Timeout is the time interval between the individual port exchanges of LACP packets in

Timeout

order to check that the peer port in the trunk group is still up. If a port does not

 

respond after three tries, then it is deemed to be “down” and is removed from the

 

trunk. Set a short timeout (one second) for busy trunked links to ensure that disabled

 

ports are removed from the trunk group as soon as possible. Select from 1 second to

 

30 seconds.

 

 

Apply

Click Apply to save the changes.

 

 

16.5 Port STP

Use the Port STP screen to set multiple/Rapid STP for the selected port(s).

To open the configuration screen, right-click on the switch in the Device List Panel, and click Configuration > Ethernet Port > Port STP. Then select a device and the port(s) to which you want to apply this configuration.

Figure 117 Ethernet Port Configuration: Port STP

The following table describes the fields in this screen.

Table 83 Ethernet Port Configuration: Port STP

LABEL

DESCRIPTION

RSTP

Select this check box to activate Rapid STP (RSTP) on this port.

 

 

MRSTP

Select this check box to activate Multiple Rapid STP (MRSTP) on this port.

 

 

RSTP

 

 

 

 

167

NetAtlas Workgroup User’s Guide