Chapter 16 Ethernet Port Configuration
The following table describes the labels in this screen.
Table 81 Ethernet Port Configuration: Port VLAN
LABEL | DESCRIPTION |
Ingress | This feature is not supported on all models. |
| If this check box is selected for a port, the device discards incoming frames for VLANs |
| that do not include this port in its member set. |
|
|
PVID | Each port on the switch is capable of passing tagged or untagged frames. To forward a |
| frame from an IEEE 802.1Q |
| switch, the switch first decides where to forward the frame, and then inserts a VLAN tag |
| reflecting the default ingress port's VLAN ID, the PVID. The default PVID is VLAN 1 for |
| all ports, but this can be changed to any number between 1 and 4094. |
|
|
GVRP | Select the check box to permit VLAN groups beyond the local switch on this port. GVRP |
| (GARP VLAN Registration Protocol) is a registration protocol that defines a way for |
| switches to register necessary VLAN members on ports across the network. |
|
|
Acceptable | Specify the type of frames allowed on a port. Choices are All and Tag Only. Select All |
Frame Type | to accept all frames with untagged or tagged frames on this port. This is the default |
| setting. Select Tag Only to accept only tagged frames on this port. All untagged frames |
| are dropped. |
|
|
VLAN | Enable VLAN trunking on ports connected to other switches or routers (but not ports |
Trunking | directly connected to end users) to allow frames belonging to unknown VLAN groups to |
| pass through the switch. |
|
|
Apply | Click Apply to save the changes. |
|
|
16.4 Port Link Aggregation
Use the Port Link Aggregation screen to configure a port trunk group and set LACP timeout.
To open the configuration screen,
Figure 116 Ethernet Port Configuration: Port Link Aggregation
166 |
| |
NetAtlas Workgroup User’s Guide |
| |
|
|
|