Chapter 15 VLAN

Figure 111 VLAN Configuration: 802.1Q

The following table describes the labels in this screen.

Table 76 VLAN Configuration: 802.1Q

LABEL

DESCRIPTION

Device Name

This field displays the descriptive name for the device.

 

 

Device IP

This field displays the IP address of the device.

 

 

VLAN ID

This field displays the ID of the VLAN.

 

 

Name

This field displays the name of the VLAN.

 

 

Status

This field displays Active if the VLAN is active and will remain so after the next reset

 

of the device. This field is DynamicGVRP if the VLAN is active and will remain so

 

until removed by GVRP. This field is Other if the VLAN is active, but is not

 

permanent or created by GVRP.

 

 

Start VID

Enter the first VID in the range of VLAN IDs you want to display.

 

 

End VID

Enter the last VID in the range of VLAN IDs you want to display.

 

 

Numbers of

Enter the number of VLAN IDs (between 1 and 100) you want to display at a time.

VLAN(s) per

 

page (Max 100)

 

 

 

Refresh

Click Refresh to update the VID list.

 

 

New

Click New to create a new VLAN. You must enter a VLAN ID and a VLAN Name to

 

create a new VLAN. The new VLAN and name is displayed in the left-hand column

 

in this screen.

 

 

Delete

Click on a VLAN in the left-hand column of this screen and then click the Delete

 

button to remove it from the VLAN template.

 

 

158

 

NetAtlas Workgroup User’s Guide