Chapter 17 Multicast Configuration

Figure 133 Multicast Configuration: MVR: Add MVLAN

2Select Active to enable this multicast VLAN setting.

3In the Name field, enter a descriptive name (up to 32 ASCII characters) for identification purposes.

4Specify a VLAN ID in the Multicast VLAN ID field. Enter a number between 1 and 4094.

5In the 802.1p Priority field, select a priority level (0-7) with which the switch replaces the priority in outgoing IGMP control packets (belonging to this multicast VLAN).

6In the Mode field, select Dynamic to send IGMP reports to all MVR source ports in the multicast VLAN. Select Compatible to set the switch not to send IGMP reports.

7In the Source Port list box, select the MVR source port that sends and receives multicast traffic.

8In the Receiver Port list box, select the port(s) that only receives multicast traffic.

9In the None list box, select the port(s) not to participate in MVR. No MVR multicast traffic is sent or received on the port(s).

10In the Tagging list box, select the port(s) to add the VLAN ID tag to all outgoing frames.

11Click OK to save the settings and close this screen. Otherwise, click Cancel to discard the settings and close this screen.

12A screen displays showing the configuration result. Click Done to close the screen.

Figure 134 Multicast Configuration: MVR: Add MVLAN: Result

 

187

NetAtlas Workgroup User’s Guide