Chapter 5 View
Figure 36 View: IP Application Status: VRRP Status
The following table describes the labels in this screen.
Table 27 View: IP Application Status: VRRP Status
LABEL | DESCRIPTION |
Device Name | This field displays the descriptive name of a device. |
|
|
Device IP | This field displays the IP address of a device |
|
|
Index | This field displays the index number of a rule. |
|
|
Network | This field displays the IP address and the subnet mask bits of an IP routing domain |
| that is associated to a virtual router. |
|
|
VRID | This field displays the ID number of the virtual router. |
|
|
VR Status | This field displays the status of the virtual router. |
| This field is Master indicating that this switch functions as the master router. |
| This field is Backup indicating that this switch functions as a backup router. |
| This field displays Init when this switch is initiating the VRRP protocol or when the |
| Uplink Status field displays Dead. |
|
|
Uplink Status | This field displays the status of the link between this switch and the uplink gateway. |
| This field is Alive indicating that the link between this switch and the uplink gateway is |
| up. Otherwise, this field is Dead. |
| This field displays Probe when this switch is check for the link state. |
|
|
Polling | The text box displays how often (in seconds) this screen refreshes. You may change |
| the refresh interval by typing a new number in the text box and then clicking Apply. |
|
|
Close | Click Close to close this screen. |
|
|
Follow the steps below to view the OSPF status of a selected device.
| 73 |
NetAtlas Workgroup User’s Guide | |
|
|