Chapter 14 Switch Configuration
"The number of link aggregation groups varies depending on your switch models.
Figure 103 Switch Configuration: Link Aggregation
The following table describes the labels in this screen.
Table 69 Switch Configuration: Link Aggregation
TABLE | DESCRIPTION |
LACP |
|
|
|
System Priority | LACP system priority is a number between 1 and 65,535. The switch with the lowest |
| system priority (and lowest port number if system priority is the same) becomes the |
| LACP “server”. The LACP “server” controls the operation of LACP setup. Enter a |
| number to set the priority of an active port using Link Aggregate Control Protocol |
| (LACP). The smaller the number, the higher the priority level. |
|
|
Group Setting |
|
|
|
Group ID | The field identifies the link aggregation group, that is, one logical link containing |
| multiple ports |
|
|
Active | Select this option to activate a trunk group. |
|
|
Dynamic | Select this check box to enable LACP for a trunk. |
(LACP) |
|
|
|
Apply | Click Apply to save your changes. |
|
|
150 |
| |
NetAtlas Workgroup User’s Guide |
| |
|
|
|