Chapter 5 View
Figure 28 View: Port Status
The following table describes the labels in this screen.
Table 19 View: Port Status
LABEL | DESCRIPTION |
Device Name | This field displays the descriptive name of a device. |
|
|
Device IP | This field displays the IP address of a device |
|
|
Port | This identifies the Ethernet port. |
|
|
Link Speed | This field displays the speed (either 10M for 10Mbps, 100M for 100Mbps or 1000M |
| for 1000Mbps). |
|
|
State | This field displays the STP state of the port. See the Spanning Tree Protocol |
| chapter for details on STP port states. |
|
|
LACP | This field displays whether LACP is activated. |
|
|
PD | This field displays the power device (PD) module status on the switch. If N/A is |
| displayed, the switch does not include a PD module. |
| This field displays On if the switch has a PD and it is in use. |
| This field displays Off if the switch has a PD, but it is not in use. |
|
|
TxPkts | This field shows the number of transmitted frames on this port. |
|
|
RxPkts | This field shows the number of received frames on this port. |
|
|
Errors | This field shows the number of received errors on this port. |
|
|
Polling | The text box displays how often (in seconds) this screen refreshes. You may |
| change the refresh interval by typing a new number in the text box and then clicking |
| the Apply button. |
|
|
Close | Click Close to close the screen. |
|
|
| 63 |
NetAtlas Workgroup User’s Guide | |
|
|