Chapter 18 Configuration

Figure 141 RMON Configuration: Event Config.: New

The following table describes the labels in this screen.

Table 102 RMON Configuration: Event Config.: New

LABEL

DESCRIPTION

Active

Select Yes to enable this event. Otherwise, select No.

 

 

Type

Select an event type. Choices are Log and Trap.

 

Select Log to generate a log when an associated alarm is generated.

 

Select Trap to generate a trap when an associated alarm is generated.

 

Select both Log and Trap to generate a log entry and trap when an associated

 

alarm is generated.

 

 

Community

This field displays the community (or password). You can use 1-31 printable ASCII

 

characters. Spaces are allowed.

 

 

Description

Enter a description of the event. You can use 1-127 printable ASCII characters.

 

Spaces are allowed. You can also leave this field blank.

 

 

Owner

Enter a descriptive name of the application that creates this entry. You can use 1-31

 

printable ASCII characters. Spaces are allowed.

 

 

OK

Click this to save the settings and close this screen.

 

 

Cancel

Click this to discard all changes and close the screen.

 

 

18.4 Alarm Config

Use this screen to configure alarms that occur when the sampled data exceeds the specified threshold. To open this screen, right-click on the switch in the Device List Panel, and click Configuration > RMON Configuration > Alarm Config. Then, select the switch that you want to configure.

 

195

NetAtlas Workgroup User’s Guide