Chapter 17 Multicast Configuration
Follow the steps below to create a new MVR group.
1In the MVR screen, select one entry in the MVLAN list table.
2Click Add under MVR Group.
Figure 135 Multicast Configuration: MVR: Select MVLAN
3A screen displays as shown. The Multicast VLAN ID field displays the VLAN ID to which this MVR group setting applies. In the Name field, enter a descriptive name for identification purposes.
Figure 136 Multicast Configuration: MVR: Add
4In the Start Address field, enter the starting IP multicast address of the multicast group in dotted decimal notation.
5In the End Address field, enter the ending IP multicast address of the multicast group in dotted decimal notation.
Enter the same IP address as the Start Address field if you want to configure only one IP address for a multicast group.
188 |
| |
NetAtlas Workgroup User’s Guide |
| |
|
|
|