Chapter 2 Main EMS Screen
Figure 11 Admin: SNMP Operation Mode
The following table describes the fields in this screen.
Table 7 Admin: SNMP Operation
LABEL | DESCRIPTION |
Client Sends SNMP | Select this option to set the EMS remote client computer(s) to send SNMP |
Operation via Server | messages to managed ZyXEL devices through the EMS server. |
| Select this option if the remote client computer(s) is not in the same subnet as |
| the managed devices. |
|
|
Client Sends SNMP | Select this option to allow the EMS remote client computer(s) to send SNMP |
Operation itself | messages directly to managed ZyXEL devices. |
| Select this option if the remote client computer(s) is in the same subnet as the |
| managed devices. |
|
|
OK | Click OK to save changes to the EMS. |
|
|
Cancel | Click Cancel to discard the change and close the screen. |
|
|
2.5 Accessing the Switch Manager Screen
To display the EMS main screen, click on the device icon in the main screen.
The EMS polls for all the available switches. Select a device icon to display a graphic of the switch in the Device Panel. You can only display one switch in the Device Panel at one time.
| 39 |
NetAtlas Workgroup User’s Guide | |
|
|