Chapter 13 System Configuration

Figure 98 System Configuration: IP Setup

The following table describes the labels in this screen.

Table 62 System Configuration: IP Setup

LABEL

DESCRIPTION

IP Setup

 

 

 

Domain Name

DNS (Domain Name System) is for mapping a domain name to its corresponding IP

Server

address and vice versa. Enter a domain name server IP address in order to be able to

 

use a domain name instead of an IP address.

 

 

Default

Specify which traffic flow (In-Bandor Out-of-band) the switch is to send packets

Management

originating from itself (such as SNMP traps) or packets with unknown source.

 

Select Out-of-bandto have the switch send the packets to the management port

 

labelled MGMT. This means that device(s) connected to the other port(s) do not

 

receive these packets.

 

Select In-Bandto have the switch send the packets to all ports except the

 

management port (labelled MGMT) to which connected device(s) do not receive

 

these packets.

 

 

In-band Management IP Address

Use these fields to set the settings for the in-band management port.

DHCP Client

Select this option to have the switch automatically obtain an IP address from a DHCP

 

server.

 

 

Static IP

Select this option to specify a fixed IP address for the switch and configure the fields

Address

below.

 

 

IP Address

Enter the in-band management IP address of your switch in dotted decimal notation.

 

For example, 192.168.0.1.

 

 

IP Subnet

Enter the IP subnet mask of your switch in dotted decimal notation for example

Mask

255.255.255.0.

 

 

Default

Enter the IP address of the default outgoing gateway in dotted decimal notation, for

Gateway

example 192.168.0.254

 

 

VID

Enter the VLAN ID to which this IP address belongs.

 

 

140

 

NetAtlas Workgroup User’s Guide