ZyXEL
17.2 Time and Date Setting
The
The real time is then displayed in the
1Select menu 24 in the main menu to open Menu 24 – System Maintenance.
2Then enter 10 to go to Menu 24.10 – System Maintenance – Time and Date Setting to update the time and date settings of your
Menu 24.10 - System Maintenance - Time and Date Setting
Time Protocol= NTP
Time Server Address= 128.105.39.21
Current Time: | 05 | : 47 | : | 19 | |
New Time (hh:mm:ss): | 05 | : 47 | : | 17 | |
Current Date: | 2000 | - 01 | – 01 | ||
New Date | 2000 | - 01 | – 01 | ||
Time Zone= GMT |
|
|
|
|
|
Daylight Saving= No |
|
|
| 01 | – 01 |
Start Date |
|
|
| ||
End Date |
|
|
| 01 | – 01 |
Press ENTER to Confirm or ESC to Cancel:
The following table describes the fields in this menu.
Table 55 System Maintenance: Time and Date Setting
FIELD | DESCRIPTION |
|
|
Time Protocol | Enter the time service protocol that your time server sends when you turn on |
| the |
| check with your ISP/network administrator or use trial and error to find a |
| protocol that works. The main differences between them are the format. |
| Daytime (RFC 867) format is day/month/year/time zone of the server. |
| Time |
| seconds since 1970/1/1 at 0:0:0. |
| NTP |
| None. The default, enter the time manually. |
|
|
Time Server Address | Enter the IP address or domain name of your time server. Check with your ISP/ |
| network administrator if you are unsure of this information. |
Current Time | This field displays an updated time only when you reenter this menu. |
|
|
New Time | Enter the new time in hour, minute and second format. |
|
|
Current Date | This field displays an updated date only when you |
|
|
New Date | Enter the new date in year, month and day format. |
|
|
126 | Chapter 17 System Maintenance and Information |