ZyXEL G-1000 v2 User’s Guide

Figure 52 Menu 3.5 Wireless LAN Setup

 

 

Menu 3.5 - Wireless LAN Setup

ESSID= ZyXEL

 

 

Hide ESSID= No

2437MHz

Edit MAC Address Filter= No

Channel ID= CH06

RTS Threshold= 2432

Edit Roaming Configuration= Yes

Frag. Threshold=

2432

Breathing LED= No

WEP Encryption= 64-bit WEP

Default Key= 1

 

802.11 Mode= Mixed

Key1= ********

 

Output Power= 17 dBm

Key2= ********

 

Block Intra-BSS Traffic= No

Key3= ********

 

 

Key4= ********

 

 

Authen. Method= Auto

 

Press ENTER to Confirm or ESC to Cancel:

3Move the cursor to the Edit Roaming Configuration field. Press [SPACE BAR] to select Yes and then press [ENTER]. Menu 3.5.2 – Roaming Configuration displays as shown next.

Figure 53 WLAN Roaming Configuration

Menu 3.5.2 - Roaming Configuration

Active= Yes

Port #= 3517

The following table describes the fields in this menu.

Table 44 Menu 3.5.4 Bridge Link Configuration

FIELD

DESCRIPTION

 

 

Active

Press [SPACE BAR] and then [ENTER] to select Yes to enable roaming on the

 

G-1000 v2 if you have two or more G-1000 v2s on the same subnet.

Port #

Type the port number to communicate roaming information between access

 

points. The port number must be the same on all access points. The default is

 

3517. Make sure this port is not used by other services.

When you have completed this menu, press [ENTER] at the prompt “Press ENTER to confirm or ESC to cancel” to save your configuration or press [ESC] to cancel and go back to the previous screen.

104

Chapter 12 LAN Setup