ZyXEL G-1000 v2 User’s Guide

Note: You can also restore defaults via the web configurator.(refer to the Maintenance chapter).

2.4 Navigating the Web Configurator

We use the P-662HW-D1 web screens in this guide as an example. Screens vary slightly for different G-1000 v2 models.

2.4.1 Navigation Panel

After you enter the password, use the sub-menus on the navigation panel to configure G-1000 v2 features. The following table describes the sub-menus.

Figure 5 Web Configurator: Main Screen

ClickClickthetheLogouticoniconatatanyanytimetime totoexitexithethewebwebconfigurator. .

Use submenus to configure G-1000 v2 features.

Note: Click the icon (located in the top right corner of most screens) to view embedded help.

Table 4 Web Configurator Screens Summary

LINK/ICON

SUB-LINK

FUNCTION

 

 

 

Wizard

 

Use these screens for initial configuration including general

 

 

setup, wireless security and IP address assignment.

Logout

 

Click this icon to exit the web configurator.

 

 

 

Chapter 2 Introducing the Web Configurator

35