ZyXEL
Remote management setup is for managing Telnet, FTP and Web services. You can customize the service port, access interface and the secured client IP address to enhance security and flexibility.
You may manage your
the Internet (WAN only), the LAN only, All (LAN and WAN) or Disable (neither).
Table 56 Remote Management Port Control
WAN only (Internet) | ALL (LAN and WAN) |
LAN only | Disable (Neither) |
Note: If you enable remote management of a service, but have applied a filter to block the service, then you will not be able to remotely manage the service.
Enter 11, from menu 24, to display Menu 24.11 - Remote Management Control (shown next)
Figure 78 Menu 24.11 Remote Management Control
| Menu 24.11 - Remote | Management Control | |
TELNET Server: | Port = 23 | = | Access = ALL |
FTP Server: | Secure Client IP | 0.0.0.0 | |
Port = 21 | = | Access = ALL | |
Web Server: | Secure Client IP | 0.0.0.0 | |
Port = 80 | = | Access = ALL | |
SNMP Service: | Secure Client IP | 0.0.0.0 | |
Port = 161 | = | Access = ALL | |
DNS Service: | Secure Client IP | 0.0.0.0 | |
Port = 53 | Access = ALL | ||
| Secure Client IP | = | 0.0.0.0 |
| Press ENTER to Confirm | or ESC to Cancel: |
128 | Chapter 17 System Maintenance and Information |