ZyXEL G-1000 v2 User’s Guide

CH A P T E R 17

System Maintenance and Information

This chapter leads you through SMT menus 24.8 and 24.10.

17.1 Command Interpreter Mode

The Command Interpreter (CI) is a part of the main system firmware. The CI provides much of the same functionality as the SMT, while adding some low-level setup and diagnostic functions. Enter the CI from the SMT by selecting menu 24.8. See the included disk or the zyxel.com web site for more detailed information on CI commands. Enter 8 from Menu 24 – System Maintenance. A list of valid commands can be found by typing help or ? at the command prompt. Type “exit” to return to the SMT main menu when finished.

Figure 74 Menu 24 System Maintenance

Menu 24 - System Maintenance

1.System Status

2.System Information and Console Port Speed

3.Log and Trace

4.Diagnostic

5.Backup Configuration

6.Restore Configuration

7.Upload Firmware

8.Command Interpreter Mode

10.Time and Date Setting

11.Remote Management Setup

Enter Menu Selection Number:

Figure 75 Valid CI Commands

Copyright (c) 1994 - 2005 ZyXEL Communications Corp.

G-1000v2> ?

Valid commands are:

device

ether

sys

exit

config

wlan

ip

ppp

bridge

cnm

radius

8021x

G-1000v2>

 

 

 

Chapter 17 System Maintenance and Information

125