ZyXEL G-1000 v2 User’s Guide

10.4 Navigating the SMT Interface

The SMT (System Management Terminal) is the interface that you use to configure your G- 1000 v2. Several operations that you should be familiar with before you attempt to modify the configuration are listed in the table below.

Table 38 Main Menu Commands

OPERATION

KEYSTROKE

DESCRIPTION

 

 

 

Move down to

[ENTER]

To move forward to a submenu, type in the number of the

another menu

 

desired submenu and press [ENTER].

Move up to a

[ESC]

Press [ESC] to move back to the previous menu.

previous menu

 

 

Move to a “hidden”

Press [SPACE BAR]

Fields beginning with “Edit” lead to hidden menus and

menu

to change No to Yes

have a default setting of No. Press [SPACE BAR] once to

 

then press [ENTER].

change No to Yes, then press [ENTER] to go to the

 

 

“hidden” menu.

Move the cursor

[ENTER] or [UP]/

Within a menu, press [ENTER] to move to the next field.

 

[DOWN] arrow keys.

You can also use the [UP]/[DOWN] arrow keys to move to

 

 

the previous and the next field, respectively.

Entering information

Type in or press

You need to fill in two types of fields. The first requires you

 

[SPACE BAR], then

to type in the appropriate information. The second allows

 

press [ENTER].

you to cycle through the available choices by pressing

 

 

[SPACE BAR].

Required fields

<?> or ChangeMe

All fields with the symbol <?> must be filled in order to be

 

 

able to save the new configuration.

 

 

All fields with ChangeMe must not be left blank in order to

 

 

be able to save the new configuration.

N/A fields

<N/A>

Some of the fields in the SMT will show a <N/A>. This

 

 

symbol refers to an option that is Not Applicable.

Save your

[ENTER]

Save your configuration by pressing [ENTER] at the

configuration

 

message “Press ENTER to confirm or ESC to cancel”.

 

 

Saving the data on the screen will take you, in most cases

 

 

to the previous menu.

Exit the SMT

Type 99, then press

Type 99 at the main menu prompt and press [ENTER] to

 

[ENTER].

exit the SMT interface.

After you enter the password, the SMT displays the main menu, as shown next.

Chapter 10 Introducing the SMT

95