ZyXEL G-1000 v2 User’s Guide

The following table describes the wireless LAN security labels in this screen. Table 20 Wireless: WPA(2)

LABEL

DESCRIPTION

 

 

WPA Compatible

This check box is available only when you select WPA2-PSKor WPA2 in the

 

Security Mode field.

 

Select the check box to have both WPA2 and WPA wireless clients be able to

 

communicate with the G-1000 v2 even when the G-1000 v2 is using WPA2-PSK

 

or WPA2.

ReAuthentication

Specify how often wireless stations have to resend usernames and passwords in

Timer (In Seconds)

order to stay connected. Enter a time interval between 10 and 9999 seconds. The

 

default time interval is 1800 seconds (30 minutes).

 

 

Note: If wireless station authentication is done using a RADIUS

 

 

server, the reauthentication timer on the RADIUS server

 

 

has priority.

 

 

Idle Timeout (In

The G-1000 v2 automatically disconnects a wireless station from the wired

Seconds)

network after a period of inactivity. The wireless station needs to enter the

 

 

username and password again before access to the wired network is allowed.

 

 

The default time interval is 3600 seconds (or 1 hour).

Group Key Update

The Group Key Update Timer is the rate at which the AP (if using WPA(2)-PSK

Timer (In Seconds)

key management) or RADIUS server (if using WPA(2) key management) sends a

 

 

new group key out to all clients. The re-keying process is the WPA(2) equivalent

 

 

of automatically changing the WEP key for an AP and all stations in a WLAN on a

 

 

periodic basis. Setting of the Group Key Update Timer is also supported in

 

 

WPA(2)-PSKmode. The G-1000 v2 default is 1800 seconds (30 minutes).

Authentication Server

 

 

 

IP Address

 

Enter the IP address of the external authentication server in dotted decimal

 

 

notation.

Port Number

 

Enter the port number of the external authentication server. The default port

 

 

number is 1812.

 

 

You need not change this value unless your network administrator instructs you

 

 

to do so with additional information.

Shared Secret

 

Enter a password (up to 31 alphanumeric characters) as the key to be shared

 

 

between the external authentication server and the G-1000 v2.

 

 

The key must be the same on the external authentication server and your G-1000

 

 

v2. The key is not sent over the network.

Accounting Server (optional)

 

 

Active

 

Select Yes from the drop down list box to enable user accounting through an

 

 

external authentication server.

IP Address

 

Enter the IP address of the external accounting server in dotted decimal notation.

 

 

 

Port Number

 

Enter the port number of the external accounting server. The default port number

 

 

is 1813.

 

 

You need not change this value unless your network administrator instructs you

 

 

to do so with additional information.

Shared Secret

 

Enter a password (up to 31 alphanumeric characters) as the key to be shared

 

 

between the external accounting server and the G-1000 v2.

 

 

The key must be the same on the external accounting server and your G-1000

 

 

v2. The key is not sent over the network.

Apply

 

Click Apply to save your changes back to the G-1000 v2.

 

 

 

Reset

 

Click Reset to reload the previous configuration for this screen.

 

 

 

Chapter 4 Wireless LAN

59