ZyXEL
Figure 27 Remote Management: FTP
The following table describes the labels in this screen.
Table 27 Remote Management: FTP
LABEL | DESCRIPTION |
|
|
Port | You may change the server port number for a service if needed, however you must |
| use the same port number in order to use that service for remote management. |
Server Access | Select the interface(s) through which a computer may access the |
| this service. |
Secured Client IP | A secured client is a “trusted” computer that is allowed to communicate with the G- |
Address | 1000 v2 using this service. |
| Select All to allow any computer to access the |
| Choose Selected to just allow the computer with the IP address that you specify to |
| access the |
Apply | Click Apply to save your customized settings and exit this screen. |
|
|
Cancel | Click Cancel to begin configuring this screen afresh. |
|
|
6.6 SNMP
Simple Network Management Protocol (SNMP) is a protocol used for exchanging management information between network devices. SNMP is a member of the TCP/IP protocol suite. Your
Note: SNMP is only available if TCP/IP is configured.
Chapter 6 Remote Management Configuration | 71 |