ZyXEL G-1000 v2 User’s Guide

Figure 29 Remote Management: SNMP

The following table describes the labels in this screen.

Table 29 Remote Management: SNMP

LABEL

DESCRIPTION

 

 

SNMP Configuration

 

 

 

Get Community

Enter the Get Community, which is the password for the incoming Get and

 

GetNext requests from the management station. The default is public and allows

 

all requests.

Set Community

Enter the Set community, which is the password for incoming Set requests

 

from the management station. The default is public and allows all requests.

Trap Community

Type the trap community, which is the password sent with each trap to the

 

SNMP manager. The default is public and allows all requests.

Trap Destination

Type the IP address of the station to send your SNMP traps to.

 

 

SNMP

 

 

 

Service Port

You may change the server port number for a service if needed, however you

 

must use the same port number in order to use that service for remote

 

management.

Server Access

Select the interface(s) through which a computer may access the G-1000 v2

 

using this service.

Secured Client IP

A secured client is a “trusted” computer that is allowed to communicate with the

Address

G-1000 v2 using this service.

 

Select All to allow any computer to access the G-1000 v2 using this service.

 

Choose Selected to just allow the computer with the IP address that you specify

 

to access the G-1000 v2 using this service.

Apply

Click Apply to save your customized settings and exit this screen.

 

 

Cancel

Click Cancel to begin configuring this screen afresh.

 

 

74

Chapter 6 Remote Management Configuration