ZyXEL Communications ZyXEL G-1000 v2 Table, 17.3.2 FTP, 17.3.3 Web, 17.3.1 Telnet, Figure 77 Telnet Configuration on a TCP/IP Network

	ZyXEL G-1000 v2 User’s Guide
Table 55 System Maintenance: Time and Date Setting
FIELD	DESCRIPTION
Time Zone	Press [SPACE BAR] and then [ENTER] to set the time difference between your
	time zone and Greenwich Mean Time (GMT).
Daylight Saving	If you use daylight savings time, then choose Yes.
Start Date	If using daylight savings time, enter the month and day that it starts on.
End Date	If using daylight savings time, enter the month and day that it ends on

Once you have filled in this menu, press [ENTER] at the message “Press ENTER to Confirm or ESC to Cancel“ to save your configuration, or press [ESC] to cancel.

The G-1000 v2 resets the time in three instances:

1On leaving menu 24.10 after making changes.

2When the G-1000 v2 starts up, if there is a timeserver configured in menu 24.10.

324-hour intervals after starting.

17.3Remote Management Setup

17.3.1 Telnet

You can configure your G-1000 v2 for remote Telnet access as shown next.

Figure 77 Telnet Configuration on a TCP/IP Network17.3.2 FTP

You can upload and download G-1000 v2 firmware and configuration files using FTP. To use this feature, your computer must have an FTP client.

17.3.3 Web

You can use the G-1000 v2’s embedded web configurator for configuration and file management. See the online help for details.

Chapter 17 System Maintenance and Information 127