ZyXEL G-1000 v2 User’s Guide

•The IP address in the Secured Client IP field does not match the client IP address. If it does not match, the G-1000 v2 will disconnect the session immediately.

•There is already another remote management session with an equal or higher priority running. You may only have one remote management session running at one time.

•There is a firewall rule that blocks it.

6.1.2System Timeout

There is a default system management idle timeout of five minutes (three hundred seconds). The G-1000 v2 automatically logs you out if the management session remains idle for longer than this timeout period. The management session does not time out when a statistics screen is polling.

6.2 WWW

To change your G-1000 v2’s World Wide Web settings, click Advanced > Remote MGMT to display the WWW screen.

Figure 24 Remote Management: WWW

The following table describes the labels in this screen.

Table 25 Remote Management: WWW

LABEL

DESCRIPTION

 

 

Port

You may change the server port number for a service if needed, however you must

 

use the same port number in order to use that service for remote management.

Server Access

Select the interface(s) through which a computer may access the G-1000 v2 using

 

this service.

Secured Client IP

A secured client is a “trusted” computer that is allowed to communicate with the G-

Address

1000 v2 using this service.

 

Select All to allow any computer to access the G-1000 v2 using this service.

 

Choose Selected to just allow the computer with the IP address that you specify to

 

access the G-1000 v2 using this service.

68

Chapter 6 Remote Management Configuration