ZyXEL G-1000 v2 User’s Guide

3.3.4 Apply Settings

If you changed the SSID on your device or implemented any security, then you will have to make the corresponding changes on your wireless station to reconnect to the G-1000 v2.

The following table describes the labels in this screen.

Table 13

Apply Settings

 

 

 

LABEL

 

DESCRIPTION

 

 

 

Back

 

Click Back to display the previous screen.

 

 

 

Apply

 

Click Apply to save your configuration settings.

 

 

 

Exit

 

Click Exit to quit the wizard without saving the changes.

 

 

 

Note: If you changed the SSID on your device or implemented any security, then you will have to make the corresponding changes on your wireless stations to reconnect to the AP.

If you changed the IP address of your G-1000 v2 or if an IP address is assigned to the G-1000 v2 automatically, you can access the device by using the new IP address or typing “http://zyxelXXXX” (where XXXX are the last four digits of your devices MAC address) in your browser. The MAC address can be found on the back label of your G-1000 v2.

Congratulations, you have completed your configuration wizard. Click Finish to exit the wizard.

Chapter 3 Wizard Setup

47