ZyXEL G-1000 v2 User’s Guide

CH A P T E R 6

Remote Management

Configuration

This chapter provides information on configuring remote management.

6.1 Remote Management Overview

Remote management allows you to determine which services/protocols can access which G- 1000 v2 interface (if any) from which computers.

Note: When you configure remote management to allow management from the WAN, you still need to configure a firewall rule to allow access.

You may manage your G-1000 v2 from a remote location via:

•Internet (WAN only)

•ALL (LAN and WAN)

•LAN only,

•Neither (Disable).

Note: When you choose WAN only or LAN & WAN, you still need to configure a firewall rule to allow access.

To disable remote management of a service, select Disable in the corresponding Access Status field.

You may only have one remote management session running at a time. The G-1000 v2 automatically disconnects a remote management session of lower priority when another remote management session of higher priority starts. The priorities for the different types of remote management sessions are as follows.

1Telnet

2HTTP

6.1.1Remote Management Limitations

Remote management over LAN or WAN will not work when:

• You have disabled that service in one of the remote management screens.

Chapter 6 Remote Management Configuration

67