ZyXEL G-1000 v2 User’s Guide
CH A P T E R 1
Getting to Know Your Device
This chapter introduces the main features and applications of the G-1000 v2.
1.1 Introducing the ZyXEL G-1000 v2
The ZyXEL G-2000 Plus v2 is a wireless access point. The G-1000 v2 offers highly secured wireless connectivity to your wired network with IEEE 802.1X, WEP data encryption, WPA(2) (Wi-Fi Protected Access) and MAC address filtering.
The G-1000 v2 is easy to install and configure. The embedded web-based configurator and SNMP network management enables remote configuration and management of your G-1000 v2.
1.2 Features
The following sections describe the features of the G-1000 v2.
Note: See the product specifications in the appendix for detailed features and standards support.
1.2.1 Physical Features
10/100M Auto-negotiating Ethernet/Fast Ethernet Interface
This auto-negotiating feature allows the G-1000 v2 to detect the speed of incoming transmissions and adjust appropriately without manual intervention. It allows data transfer of either 10 Mbps or 100 Mbps in either half-duplex or full-duplex mode depending on your Ethernet network.
10/100M Auto-crossover Ethernet/Fast Ethernet Interface
The LAN interface automatically adjusts to either a crossover or straight-through Ethernet cable.
Reset Button
The G-1000 v2 reset button is built into the side panel. Use this button to restore the factory default password to 1234; IP address to 192.168.1.2 and subnet mask to 255.255.255.0.
Chapter 1 Getting to Know Your Device | 27 |