ZyXEL G-1000 v2 User’s Guide

Figure 51 Menu 3.5.1 WLAN MAC Address Filter

Menu 3.5.1 - WLAN MAC Address Filter

Active= No

Filter Action= Allowed Association

------------------------------------------------------------------------------

1=

00:00:00:00:00:00

13=

00:00:00:00:00:00

25=

00:00:00:00:00:00

2=

00:00:00:00:00:00

14=

00:00:00:00:00:00

26=

00:00:00:00:00:00

3=

00:00:00:00:00:00

15=

00:00:00:00:00:00

27=

00:00:00:00:00:00

4=

00:00:00:00:00:00

16=

00:00:00:00:00:00

28=

00:00:00:00:00:00

5=

00:00:00:00:00:00

17=

00:00:00:00:00:00

29=

00:00:00:00:00:00

6=

00:00:00:00:00:00

18=

00:00:00:00:00:00

30=

00:00:00:00:00:00

7=

00:00:00:00:00:00

19=

00:00:00:00:00:00

31=

00:00:00:00:00:00

8=

00:00:00:00:00:00

20=

00:00:00:00:00:00

32=

00:00:00:00:00:00

9=

00:00:00:00:00:00

21=

00:00:00:00:00:00

 

 

10=

00:00:00:00:00:00

22=

00:00:00:00:00:00

 

 

11=

00:00:00:00:00:00

23=

00:00:00:00:00:00

 

 

12=

00:00:00:00:00:00

24=

00:00:00:00:00:00

 

 

------------------------------------------------------------------------------

Enter here to CONFIRM or ESC to CANCEL:

The following table describes the fields in this menu.

Table 43 Menu 3.5.1 WLAN MAC Address Filter

FIELD

DESCRIPTION

 

 

Active

To enable MAC address filtering, press [SPACE BAR] to select Yes and press [ENTER].

 

 

Filter Action

Define the filter action for the list of MAC addresses in the MAC address filter table.

 

To deny access to the G-1000 v2, press [SPACE BAR] to select Deny Association and

 

press [ENTER]. MAC addresses not listed will be allowed to access the router.

 

The default action, Allowed Association, permits association with the G-1000 v2. MAC

 

addresses not listed will be denied access to the router.

MAC Address Filter

 

 

 

1..32

Enter the MAC addresses (in XX:XX:XX:XX:XX:XX format) of the client computers that are

 

allowed or denied access to the G-1000 v2 in these address fields.

When you have completed this menu, press [ENTER] at the prompt “Press ENTER to confirm or ESC to cancel” to save your configuration or press [ESC] to cancel and go back to the previous screen.

12.3.2 Configuring Roaming

Enable the roaming feature if you have two or more G-1000 v2s on the same subnet. Follow the steps below to allow roaming on your G-1000 v2.

1From the main menu, enter 3 to display Menu 3 – LAN Setup.

2Enter 5 to display Menu 3.5 – Wireless LAN Setup.

Chapter 12 LAN Setup

103