ZyXEL G-1000 v2 User’s Guide

CH A P T E R 2

Introducing the Web

Configurator

This chapter describes how to access the G-1000 v2 web configurator and provides an overview of its screens. The default IP address of the G-1000 v2 is 192.168.1.2.

2.1 Web Configurator Overview

The embedded web configurator allows you to manage the G-1000 v2 from anywhere through a browser such as Microsoft Internet Explorer or Netscape Navigator. Use Internet Explorer

6.0and later or Netscape Navigator 7.0 and later versions with JavaScript enabled. It is recommended that you set your screen resolution to 1024 by 768 pixels.

2.2Accessing the G-1000 v2 Web Configurator

1Make sure your G-1000 v2 hardware is properly connected and prepare your computer/ computer network to connect to the G-1000 v2 (refer to the Quick Start Guide).

2Launch your web browser.

3Type "192.168.1.2" as the URL.

4Type "1234" (default) as the password and click Login.

5You should see a screen asking you to change your password (highly recommended) as shown next. Type a new password (and retype it to confirm) and click Apply or click Ignore.

Note: If you do not change the password, the following screen appears every time you login.

Chapter 2 Introducing the Web Configurator

33